Dentapreg® BRAID Lab Anterior Bridge Strip

Dentapreg® BRAID

Name: Dentapreg® BRAID
SKU: D-602
Availability: InStock

$682

Ideal deal for bridge frameworks, especially in anterior temporaries with different retentions.
4 pcs braided preimpregnated strips; 3 x 150 x 0.3mm each; enough for approx. 20 bridges

Add $500 more to get Free Shipping!

Dentapreg® BRAID on tooth model demonstrating stabilization use.

Innovative anterior bridges with Dentapreg® BRAID offer a quick, aesthetic, and non-invasive solution for front tooth replacement indirect preparation.

Dentapreg® BRAID applied to tooth model with rubber dam isolation.

The preimpregnated light-curing reinforcement strips are easy to use, bond with any convetional composite seamlesly, making bridge creation straightforward without the need for specialized equipment.

Dentapreg® BRAID being adjusted on tooth model using dental tool.

Choose Dentapreg® to offer your patients a reliable, metal-free alternative that ensures strong, aesthetically pleasing alternative to implants and traditional bridges, enhancing your service value with confidence-inspiring results.

DENTAPREG® BRIDGES: PROSTHETICS PROBLEMS SOLVED WITH FIBER REINFORCED COMPOSITE BRIDGES

Dentapreg® provides a minimally invasive, highly aesthetic and cost-effective alternative to implants and traditional dental bridges. It can be used in just about every clinical situation where a tooth is missing. Unlike other materials, Dentapreg® strips make it possible to build a temporary bridge chair-side in a single visit – make them part of your kit to increase value for your patients and boost your caseload.

Using Dentapreg®’s highly adhesive, versatile strips makes fixed prosthodontics a lot more straightforward, whether you’re making anterior bridges or trickier posterior bridges. Ease of use is the key – you don’t need any specialized instruments or equipment as the strips are compatible with all light-curing composites – and since Dentapreg® is hypoallergenic, it’s suitable for patients allergic to metals. An ideal alternative to ceramic bridges or implants, Dentapreg® gives dentists and patients confidence to replace teeth quickly using a minimally invasive, adhesive bridge made from high performance fiber-reinforced composite.

ANTERIOR BRIDGE

Dentapreg fiber reinforcement strips let you create adhesive anterior bridges rapidly, and come in very handy for emergency tooth replacements when time is of the essence.

Dentapreg® is all about minimally invasive tooth retention and is an ideal dental flipper alternative during the healing period for an implant or for young patients with missing teeth. The enhanced strength and versatility of the materials lets you use wing retention (the ‘Maryland Bridge’ as well as other types of resin retained bridge) or other types of retention (inlay, onlay, box and crown preparation). Dentapreg® also sets you up perfectly to create pontics out of composite build-up material, to use a pre-made denture tooth, or the original tooth with the root cut out. 

General Dentapreg FAQ

What does Dentapreg® look like?

The strips and pins consist of specially surface treated glass fibers impregnated with high viscosity light-curable resin matrix. The fibers are in the form or unidirectionally oriented bundle or braided multidirectionally oriented flat tape. The dimensions vary depending on the indication range of a specific product. The strip is slightly sticky and can easily be formed and adapted into the desired position. The strip is placed under the non-transparent foil in protective films and sealed in a blister with aluminium foil.

Why is Dentapreg® strip 6 cm long?

Over the years, we have followed the recommendations from our customers and set a standard length of the pre-impregnated strips to 6 cm. This length is optimal for the needs of most applications and for minimizing the waste.

What needs to be taken care of when handling Dentapreg® products?

During manipulation, it is recommended to use powder-free latex or vinyl protective gloves and to use non-contact technique. Do not touch the unprotected strip with bare hands. Avoid using direct and intense light in the working area as this could lead to the loss of application properties. Do not use the product if it becomes contaminated or otherwise damaged while being placed.

How to cut Dentapreg® strip or pin to the desired length?

The strip can be cut using regular scissors. However, it is recommended to use clinical scissors. To avoid contamination, cut the strip when it is still placed in the protective films.

What instruments can be used when forming and adapting Dentapreg® strips and pins?

The strip can be formed and adapted in the desired position using standard instruments, such as tweezer, spatula, condenser and other composite filling instruments. Using of instruments with sharp edges should be avoided as they can damage the reinforcing fibers.

Is it necessary to treat the surface of Dentapreg® products before use?

There is no need for additional treatment of the strips or pins. The fibers are already impregnated by dental resin matrix to enssure strong and reliable adhesion.

Which adhesive system can be used in combination with Dentapreg®?

For optimal bonding, it is recommended to use a standard two-step etch-and-rinse protocol. Self-etching single step adhesive protocol is less desired and should be used in the case of short-term applications only.

Must the entire surface of the strips or pins be covered with a covering composite layer?

Strips and pins must be covered with a composite along the entire length. This is necessary in order to avoid irritation of soft oral tissues by exposed fibers and to protect the integrity of the framework structure. In the case of splinting, if there are no points of contact, build them from condensable resin composite.

What are the storage conditions before opening the blister?

Dentapreg® products should be stored at temperatures between 4 and 25 ºC (39 to 77 ºF) in an intact blister away from direct light sources. Do not expose to temperatures higher than 25 ºC (77 ºF) for extended periods of time. Do not use after the expiry date stated on the packaging.

How long after opening the blister can Dentapreg® strips be used?

After opening the blister, unused parts of the pliable strip in the protective films can be stored in the light protection box included in the packaging. In this packaging, store the product in a refrigerator at temperatures between 4 and 10 ºC, and use it within four weeks. If no contamination occurs, Dentapreg® pins can be stored without any restrictions in the original packaging for the entire shelf life.

What kind of curing light can be used to cure Dentapreg®?

The type of curing light will not affect the properties of the final application, but affects the time necessary to cure the strip. Keep in mind that a successful application of splints, retainers or frameworks requires curing the strip along its entire length and hence multiple light exposure steps progressing from one side of the application to the other are required. When using standard LED curing light with power of around 700 mW/cm2, the curing step for one tooth is 40 s. When using a high-power curing light, the light-exposure time can be adjusted accordingly.

Are there any contraindications and safety precautions to keep in mind during application of Dentapreg®?

In very rare cases, the use of Dentapreg® medical devices may be associated with an allergic reaction. The use is contraindicated in patients with known over-sensitivity to any of the components contained (especially methacrylate monomers and polymers). During application, avoid contact with eyes, skin and soft tissues and ingestion. In the case of a contact of an uncured strip with soft tissues, gently wipe the affected area with a cotton swab or gauze, and rinse with water.

Are there any special precautions to keep in mind after the application of Dentapreg®?

Inform the patient of the necessity of following hygiene principles to preserve esthetics and reduce the risk of caries. Also, instruct the patient to see the dentist without delay in the event of functional failure.

How to remove Dentapreg® application in case of need?

The removal procedure is related to the specific type of application. The procedure of splint removal after it served its desired purpose has three steps. First, remove the covering layer of the composite by using a bur or using a polishing wheel to heat up the surface of the composite. The heated composite becomes soft and can be removed with a scaler. Next, remove the strip from the surface of the teeth. The easiest way is to use a scaler or orthodontic pliers and pull it from the interproximal spaces. Finally, clean and polish the teeth. The procedure of bridge removal has four steps. This includes cutting the retentions using a diamond bur, removing the pontic, removing the rest of the composite from the abutment teeth and finally, cleaning and polishing the abutment teeth.

Didn’t find the answer?

If you can’t find the answer you’re looking for in our Q&A, feel free to submit your question using the form below. Your question might be featured in our Q&A to help others in the future.

The form has been submitted successfully!

There has been some error while submitting the form. Please verify all form fields again.

Maryland Bridge

Learn about the procedure of fabricating a Maryland bridge with Dentapreg® BRAID.

ANTERIOR BRIDGE ON A MODEL

Courtesy of Dr. Kraver, USA

Instructions for use (EN)

Instructions for use (CZ)

Get Dentapreg Whitepaper

Testimonials

Resilient_Restorations_Image_068-ec5cf6f9

Dr. Jeffrey Hoos

Chief Dentist in Connecticut, USA, affiliated with leading dental and facial esthetics academies.

Doing beautiful restorative dentistry, based on great science, with a business model in mind, enhances the ability to have a successful practice. Dentapreg® restorative and prosthetic materials ensure that the BALANCE is achieved. Would not want to practice without Dentapreg®.

Dr. Eric van Zytveld

University of Colorado, School of Dentistry, Private Practitioner, Denver, Colorado, USA

Dentapreg fiber-reinforced composites have been an important part of my practice for over eleven years. The SFM reinforced periodontal splints and PFM reinforced anterior bridges have given years of service. In October 2023, I examined a periodontal splint from tooth #22 to tooth #27 which was placed in March 2013. The splint has never broken and the only maintenance was reattaching tooth #23 to the splint in November 2017. An anterior bridge to replace tooth #23 was placed in July 2014 and is still performing well.

Dr. Tomáš Slavíček

Masaryk University, Faculty od Medicine, Private Practitioner, Brno, Czech Republic

Dentapreg® fiber-reinforced composite materials clearly expand the field of our options to restore functionality of hard dental tissues. Reliability, stability and durability is what really matters.

Dr. David J. Poiman

Private Practitioner in Manhattan, New York, and Fellow of the Academy of General Dentistry.

I am thoroughly impressed by the exceptional quality of the Dentapreg® fibre reinforcement and the Fibrafill® dentin-based materials. Their strength and durability are commendable, ensuring longevity and reliability in various dental procedures. The ease of handling of these materials offers unparalleled convenience, allowing for precise application and seamless integration into dental practices. I particularly appreciate how these materials enhance workflow efficiency, ultimately benefiting both practitioners and patients. Overall, I highly recommend these materials to dental professionals seeking top-notch performance and reliability in their practice.

Dr. Hana Hubálková

Associate Professor at Charles University, Prague, leading in prosthodontics and member of European associations.

Dentapreg® is a comprehensive set of construction composite materials. These materials are widely used in dentistry, mainly due to their excellent mechanical characteristics. They can be advantageously used as splints, framework structures of adhesive bridges, reinforcements of temporary fixed bridges, reinforcements of fixed and removable restorations including hybrids anchored on implants, reinforcements of radices and completion of destroyed clinical tooth crowns. The Dentapreg® system meets the requirements of both esthetic and minimally invasive dentistry

Dr. Nikhil Bahuguna

Director and Chief Dentist at Demystifying Smiles, Noida, India, with international dental qualifications and leadership roles.

Restorative dentistry, a name synonymous with BioMimetic Dentistry requires the use of materials and techniques mimicking nature. The use of stress reducing and dissipating materials like the Dentapeg® fiber reinforcement has made a huge difference in the bio-mechanical outlook of doing restorations in my practice. The physical properties which match the natural flexure give stronger and longer lasting core restorations and the minimally invasive radicular reinforcement protecting against cracks and fractures of the tooth-restoration complex is the biggest asset in saving the teeth for long term success.